Before applying an epoxy coating, new floors must be cured for at least 30 days. Since there are many curing contaminants on the surface that need to be burned out, the new floors will require an extra strong etching, or second etching. If you’re using an instant crack repair compound, you’ll need to fix any cracks or dicots after the etching. People want a floor that is dry to the touch, rough to the touch, and as smooth as fresh concrete, with no noticeable cracks or divots. This is the most effective method for ensuring proper epoxy bonding and a beautiful final finish.Do you want to learn more? Visit SquidPoxy Epoxy Resin Supplier
When applying epoxy to a sealed base, all of the sealers must be removed completely. As far as possible, a buffing machine or sander with an aggressive grit should be run over the sealer’s surface. To extract the sealer, make a solid Muriatic Acid solution with 2 parts water and 1 part acid.
By sprinkling water on the floor, you can see if it’s ready for treatment. If the floor beads, it must be rescinded, retched, and retested. After the sealer has been fully extracted by etching, the floor will be neutralised with TSP powder. A diamond can be needed to grind it off, depending on the sealer grade. It would be a waste of time and money to try to spread epoxy paint on a floor that already has sealer on it.
Epoxy can also be used to cover wood floors. To extract soil and factory paint, the floors must be sanded. After that, the floor must be primed with a special primer before being coated with an epoxy package. Since these can be difficult to mount, it’s best to leave it to a specialist.